Author: Mohamed Ben-Daya
Publisher: Springer Science & Business Media
ISBN: 1461543290
Category : Technology & Engineering
Languages : en
Pages : 474
Get Book
Book Description
Production costs are being reduced by automation, robotics, computer-integrated manufacturing, cost reduction studies and more. These new technologies are expensive to buy, repair, and maintain. Hence, the demand on maintenance is growing and its costs are escalating. This new environment is compelling industrial maintenance organizations to make the transition from fixing broken machines to higher-level business units for securing production capacity. On the academic front, research in the area of maintenance management and engineering is receiving tremendous interest from researchers. Many papers have appeared in the literature dealing with the modeling and solution of maintenance problems using operations research (OR) and management science (MS) techniques. This area represents an opportunity for making significant contributions by the OR and MS communities. Maintenance, Modeling, and Optimization provides in one volume the latest developments in the area of maintenance modeling. Prominent scholars have contributed chapters covering a wide range of topics. We hope that this initial contribution will serve as a useful informative introduction to this field that may permit additional developments and useful directions for more research in this fast-growing area. The book is divided into six parts and contains seventeen chapters. Each chapter has been subject to review by at least two experts in the area of maintenance modeling and optimization. The first chapter provides an introduction to major maintenance modeling areas illustrated with some basic models. Part II contains five chapters dealing with maintenance planning and scheduling. Part III deals with preventive maintenance in six chapters. Part IV focuses on condition-based maintenance and contains two chapters. Part V deals with integrated production and maintenance models and contains two chapters. Part VI addresses issues related to maintenance and new technologies, and also deals with Just-in-Time (JIT) and Maintenance.
Author: Mohamed Ben-Daya
Publisher: Springer Science & Business Media
ISBN: 1461543290
Category : Technology & Engineering
Languages : en
Pages : 474
View
Book Description
Production costs are being reduced by automation, robotics, computer-integrated manufacturing, cost reduction studies and more. These new technologies are expensive to buy, repair, and maintain. Hence, the demand on maintenance is growing and its costs are escalating. This new environment is compelling industrial maintenance organizations to make the transition from fixing broken machines to higher-level business units for securing production capacity. On the academic front, research in the area of maintenance management and engineering is receiving tremendous interest from researchers. Many papers have appeared in the literature dealing with the modeling and solution of maintenance problems using operations research (OR) and management science (MS) techniques. This area represents an opportunity for making significant contributions by the OR and MS communities. Maintenance, Modeling, and Optimization provides in one volume the latest developments in the area of maintenance modeling. Prominent scholars have contributed chapters covering a wide range of topics. We hope that this initial contribution will serve as a useful informative introduction to this field that may permit additional developments and useful directions for more research in this fast-growing area. The book is divided into six parts and contains seventeen chapters. Each chapter has been subject to review by at least two experts in the area of maintenance modeling and optimization. The first chapter provides an introduction to major maintenance modeling areas illustrated with some basic models. Part II contains five chapters dealing with maintenance planning and scheduling. Part III deals with preventive maintenance in six chapters. Part IV focuses on condition-based maintenance and contains two chapters. Part V deals with integrated production and maintenance models and contains two chapters. Part VI addresses issues related to maintenance and new technologies, and also deals with Just-in-Time (JIT) and Maintenance.
Author: Mitsutaka Kimura
Publisher:
ISBN: 9781003095231
Category : Reliability (Engineering)
Languages : en
Pages : 0
View
Book Description
"Reliability and maintenance modeling with optimization is the most fundamental and interdisciplinary research area and it can be applied to every technical and management field. This monograph provides the most recent advances and achievements in reliability and maintenance. The book discusses replacement, repair, inspection, estimation, and statistical tests along with accelerated life testing. It explores warranty analysis manufacturing and also service reliability"--
Author: Toshio Nakagawa
Publisher: Springer Science & Business Media
ISBN: 1848002947
Category : Technology & Engineering
Languages : en
Pages : 246
View
Book Description
Reliability theory is a major concern for engineers and managers engaged in making high quality products and designing highly reliable systems. “Advanced Reliability Models and Maintenance Policies” is a survey of new research topics in reliability theory and optimization techniques in reliability engineering. The book introduces partition and redundant problems within reliability models, and provides optimization techniques. The book also indicates how to perform maintenance in a finite time span and at failure detection, and to apply recovery techniques for computer systems. New themes such as reliability complexity and service reliability in reliability theory are theoretically proposed, and optimization problems in management science using reliability techniques are presented. The book is an essential guide for graduate students and researchers in reliability theory, and a valuable reference for reliability engineers engaged both in maintenance work and in management and computer systems.
Author: Christophe Gouin
Publisher: GRIN Verlag
ISBN: 364091841X
Category : Business & Economics
Languages : en
Pages : 18
View
Book Description
Scientific Essay from the year 2011 in the subject Business economics - Business Management, Corporate Governance, grade: 19,5/20, University of Rennes 1, language: English, abstract: Maintenance management and optimization of maintenance is getting more and more important for a large number of companies. The use of automated machines and equip-ment in order to produce goods is very common today; hence companies have to rely on reliable machines which are available and working 100% of the time. In order to attain a flawless working factory, maintenance management is crucial. However companies cannot hope that the decisions they make concerning maintenance management are optimal and they start therefore to use decision support systems based on optimization methods. Also maintenance management is very complex and a lot of different decisions have to be made, like defining maintenance intervals, personal planning, when to buy spare parts, when to replace equipment etc. It is easier for companies to base their decisions on a mathematical program, and therefore the use of maintenance management optimization models arises. Optimization models proved to be very advantageous in other sectors, so it was just a matter of time before optimization methods where ported to maintenance man-agement. Problematic in the case of maintenance optimization are the very specific maintenance problems resulting in a large number of different maintenance optimization models. It is consequently very difficult to get a good overview about the different models and their application. R. Dekker, who has worked a lot on maintenance optimization and on operations research in maintenance management wrote a paper about maintenance optimization methods and their application, ‘Application of maintenance optimization models: a review and analysis’. It summarizes maintenance management in general, gives a brief history of maintenance management, describes different optimization methods, their practical application, problems which can occur by applying the models etc. In this paper, I will discuss the work of R. Dekker; first of all there will be a description of the paper, explaining what it is about and giving a resume of important aspects. In the second section, the paper will be compared to other papers concerning maintenance opti-mization, different and identical aspects will be explained. Furthermore some information will be added in order to simplify the comprehension of maintenance optimization mod-els. Finally I will comment the paper, and give my opinion about the aspects that I liked and what I would describe differently.
Author: Syouji Nakamura
Publisher: World Scientific
ISBN: 9814277444
Category : Mathematics
Languages : en
Pages : 317
View
Book Description
Aims to survey research topics in reliability theory and useful applied techniques in reliability engineering. This book focuses on how to apply the results of reliability theory to practical models. Theoretical results of coherent, inspection, and damage systems are summarized methodically, using the techniques of stochastic processes.
Author: Adiel Teixeira de Almeida
Publisher: Springer Nature
ISBN: 3030896471
Category : Business & Economics
Languages : en
Pages : 508
View
Book Description
This book considers a broad range of areas from decision making methods applied in the contexts of Risk, Reliability and Maintenance (RRM). Intended primarily as an update of the 2015 book Multicriteria and Multiobjective Models for Risk, Reliability and Maintenance Decision Analysis, this edited work provides an integration of applied probability and decision making. Within applied probability, it primarily includes decision analysis and reliability theory, amongst other topics closely related to risk analysis and maintenance. In decision making, it includes multicriteria decision making/aiding (MCDM/A) methods and optimization models. Within MCDM, in addition to decision analysis, some of the topics related to mathematical programming areas are considered, such as multiobjective linear programming, multiobjective nonlinear programming, game theory and negotiations, and multiobjective optimization. Methods related to these topics have been applied to the context of RRM. In MCDA, several other methods are considered, such as outranking methods, rough sets and constructive approaches. The book addresses an innovative treatment of decision making in RRM, improving the integration of fundamental concepts from both areas of RRM and decision making. This is accomplished by presenting current research developments in decision making on RRM. Some pitfalls of decision models on practical applications on RRM are discussed and new approaches for overcoming those drawbacks are presented.
Author: Wang, John
Publisher: IGI Global
ISBN: 1466652039
Category : Business & Economics
Languages : en
Pages : 2754
View
Book Description
As the age of Big Data emerges, it becomes necessary to take the five dimensions of Big Data- volume, variety, velocity, volatility, and veracity- and focus these dimensions towards one critical emphasis - value. The Encyclopedia of Business Analytics and Optimization confronts the challenges of information retrieval in the age of Big Data by exploring recent advances in the areas of knowledge management, data visualization, interdisciplinary communication, and others. Through its critical approach and practical application, this book will be a must-have reference for any professional, leader, analyst, or manager interested in making the most of the knowledge resources at their disposal.
Author: Faruk Y?lmaz, Ömer
Publisher: IGI Global
ISBN: 1522529454
Category : Business & Economics
Languages : en
Pages : 449
View
Book Description
Todays manufacturing systems are undergoing significant changes in the aspects of planning, production execution, and delivery. It is imperative to stay up-to-date on the latest trends in optimization to efficiently create products for the market. The Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems is a pivotal reference source including the latest scholarly research on heuristic models for solving manufacturing and supply chain related problems. Featuring exhaustive coverage on a broad range of topics such as assembly ratio, car sequencing, and color constraints, this publication is ideally designed for practitioners seeking new comprehensive models for problem solving in manufacturing and supply chain management.
Author: Yu Liu
Publisher: Springer Nature
ISBN: 3031173236
Category : Architecture
Languages : en
Pages : 197
View
Book Description
This book is a detailed introduction to selective maintenance and updates readers on recent advances in this field, emphasizing mathematical formulation and optimization techniques. The book is useful for reliability engineers and managers engaged in the practice of reliability engineering and maintenance management. It also provides references that will lead to further studies at the end of each chapter. This book is a reference for researchers in reliability and maintenance and can be used as an advanced text for students.
Author: Konstantin Machleidt
Publisher:
ISBN:
Category :
Languages : en
Pages :
View
Book Description
